Varekort 19" Medical flat panel monitor LMD-1950MD Lev. 0 dage   På lager  Varenavn 19" Medical flat panel monitor LMD-1950MD Varenummer LMD-1950MD Vægt 7 Kg. Excellent picture reproduction (X Algorithm) LMD-1950MD provides sophisticated I/P (interlace to progressive) conversion using X-Algorithm technology. This combines the pixels above, below and in the diagonal direction of the moving picture part, and then inserts a natural pixel to create the absent lines. The result is much smoother image reproduction for both moving and static picture areas. Picture Delay minimum mode LCD panel has certain level of the picture delay factor, due to the response time of LCD panel device itself and the data calculation time of the signal process such as I/P conversion. This is already well known as the basic nature of all LCD monitors. But the user may wish to obtain much lower picture delay rather than higher picture quality. To satisfy this demand the Picture delay minimum mode provides the option to trade picture quality against lower picture delay. Excellent Brightness and Contrast While conventional LCD monitors can tend to be dark, the LMD-1950MD provides high-brightness and high contrast images by use of super wide aperture LCD panels. In addition, the use of precisely manufactured RGB colour filters allow these monitors to reproduce colours with stunning depth and saturation - creating highly natural images. Wide Viewing Angle The LCD panel has a wide viewing angle of 170 degrees, horizontally and vertically, with minimal reduction in picture contrast, enabling images to be viewed from various positions and angles. The User Memory The User Memory functionality provides the capability of saving 20 patterns of memory settings. Doctors can easily set, save, and recall their preferred picture setting using an assigned user name. The following parameters can be memorized to user memory: Colour temperature, Brightness, Contrast, Chroma, Phase, Aperture, Gamma, Aspect, Scan, Picture Delay Minimum, User Memory Name, User Colour Temperature. In addition factory default settings can instantly be recalled by the touch of two buttons. Auto chroma/phase function The chroma and phase of the decoder are automatically adjusted with the auto chroma phase function. Three Colour Tally The tally lamp can be lit up via a parallel remote connector and the status identified by three colours, red, green or amber. Parallel Remote (Modular 8-pin) Parallel Remote Control and Tally can be controlled via a modular 8-pin connector, and the pin assignment can be set from the On-Screen Menu. Users can control the tally lamp, select Input and activate Underscan mode or Overscan mode. Colour temperature Adjustment The colour temperatures can be selected among four preset data (HIGH, LOW, LOW2, LOW3) and the USER data can be set between 5000K and 10000K. Smart APA Perform an automatic adjustment to achieve the clearest picture while a signal is input from the HD15 input connector. Versatile Scan Mode The LMD-1950MD offers a wide choice of displaying images such as Overscan, normal scan, underscan and native picture reproduction. These various options allow doctors to decide what is the most suitable and convenient mode for them. Native Scan Mode Can be selected when displaying images generated by HD signals (1080i/720p). This mode performs pixel-to-pixel mapping without scaling when processing high-definition signals to provide a native HD image on the monitor. The centre area of the image, which is most vital during endoscopic applications, is displayed on the monitor. Key Inhabit Possible to lock the setting so that they cannot be changed by an unauthorized user. Download manual/brochure  --Picture Performance-- LCD Panel Type a-Si TFT Active Matrix LCD with an AR-coated protection panel Resolution 1280 x 1024 dots (SXGA) Picture Size (H x W) (Diagonal) Approx. 376 x 301 mm (14 7 /8 x 11 7 /8 inches) Diagonal 482 mm (19.1 inches) Aspect 5:04 Viewing Angle 89°/89°/89°/89°(typical) (up/down/left/right contrast>10:1) --Input / Output-- Input Composite BNC (x 1) 1.0 Vp-p ±3 dB, sync negative Y/C 4pin Mini DIN (x 1) Y: 1.0 Vp-p ±3dB, sync negative C: 0.286 Vp-p ±3dB (NTSC) / 0.3 Vp-p ±3dB (PAL) Component/RGB BNC (x 3) Component Y: 1.0 Vp-p ±3 dB Pb, Pr: 0.7 Vp-p ±3 dB RGB G: 0.7 Vp-p ±3 dB, Sync on G 0.3 Vp-p B: 0.7 Vp-p ±3 dB R: 0.7 Vp-p ±3 dB Ext. Sync BNC (x1) 0.3 - 4 Vp-p ±bipolarity ternary or negative polarity binary Computer DVI-D: TMDS (Single Link) HD15 Analog RGB: HD D-sub15pin (female); 0.7 Vp-p, 75 sync positive (R, G, B) Remote Parallel Modular 8 pin (Assignable)ÂSerial RS-232C (serial remote), D-sub 9-pin Output Composite BNC (x 1), Loop-through, automatic 75 Y/C 4pin Mini DIN (x 1), Loop-through, automatic 75 Component/RGB BNC (x 3), Loop-through, automatic 75 Î Ext. Sync BNC (x 1), Loop-through, automatic 75 --General-- Power Consumption Maximum: Approx. 66 W (with 2 x BKM-229X) Standard: Approx. 59 W (without optional input adaptor) Power Requirement DC 24 V 2.8 A, AC 100 to 240 V ±10%, 50/60 Hz Operating Temperature 0 to 40°C (32 to 104°F) Operating Humidity 30 to 85 % (no condensation) Storage & Transport Temperature -20 to 60°C (-4 to 140°F) Storage & Transport Humidity 0 to 90 % (no condensation) Operating / Storage / Trans. Pressure 700 hPa to 1060 hPa Dimensions (W x H x D) 442 x 403 x 118 mm (17 1 /2 x 15 7 /8 x 4 3 /4 inches) Mass 9.7 Kg (21 lb 6 oz) with 2 x BKM-229X Supplied Accessories Sales Companies Guide When You First Use The Monitor booklet Quick Reference Using the CD-ROM Manual Warranty Card CD-ROM Instructions for use DC cable AC plug holder AC power cord AC adaptor Pris ved 1 21.600,00 DKK (eks. moms) Antal    Køb   «-Tilbage  DKKDKKUSD     Vis med moms   Anbefal   Print Hvis du har nogle spørgsmål er du velkommen til at kontakte os.